Menu

SDSC SHAR Apprentice Recruitment 2026 - Apply Online for 400 Posts

SDSC SHAR Apprentice Recruitment 2026 notification has been released for 400 Graduate, Diploma, Trade and Vocational Apprentice posts at Sriharikota. Online applications are open from 6 to 26 November 2026 through the UMANG portal. Check discipline-wise vacancies, educational qualifications, monthly stipend of ₹9,600 to ₹12,300, 12-month training period and merit-based selection process.

By Job Desk | Updated: Nov 05, 2026, 6:04 pm

Satish Dhawan Space Centre SHAR (SDSC SHAR), Sriharikota, under the Department of Space, Indian Space Research Organisation (ISRO), has released the Notification for Engagement of Apprentices-2026. The recruitment drive is being conducted for 400 Apprentice positions under various graduate, diploma, trade and vocational categories.

Eligible candidates can apply online for SDSC SHAR Apprentice Recruitment 2026 from 06 November 2026 to 26 November 2026. The apprenticeship engagement is being conducted under the Apprentices Act, 1961 and the Amendment Act, 1973. The training period will be 12 months.

Official Notification PDF: SDSC SHAR Apprentice Recruitment 2026

SDSC SHAR Apprentice Recruitment 2026 - Overview

Particulars Details
Organization Satish Dhawan Space Centre SHAR (SDSC SHAR)
Organization Indian Space Research Organisation (ISRO), Department of Space
Recruitment Name SDSC SHAR Apprentice Recruitment 2026
Notification No. SDSC SHAR/SCF/P&GA-II/Apprentice/2026
Total Posts 400
Application Mode Online
Online Registration Start Date 06 November 2026
Last Date to Apply 26 November 2026
Training Duration 12 Months
Job/Training Location Sriharikota
Selection Process Academic Merit List and Document Verification

SDSC SHAR Apprentice Vacancy 2026

SDSC SHAR has announced a total of 400 Apprentice positions across Engineering Graduate, Non-Engineering Graduate, Technician, Diploma (DCCP), Trade and Vocational Apprentice categories. The vacancy distribution is given below.

Apprentice Category Total Posts
Engineering Graduate Apprentice 50
Non-Engineering Graduate Apprentice 60
Technician Apprentice (Diploma) 35
Diploma (DCCP) 60
Trade Apprentice 180
Vocational Apprentice 15
Total 400

Post-Wise Vacancy Details

Engineering Graduate Apprentice - 50 Posts

Discipline Posts
Mechanical / Aerospace / Production / Industrial Engineering 15
Electronics (ECE/EIE/ICE/ETE) 10
Electrical / EEE 9
Computer Science (CSE/IT/AI&ML/DS/CS) 5
Civil 4
Chemical 7

The Engineering Graduate Apprentice category has 50 positions, with reservation distribution of UR-22, OBC-13, SC-7, ST-3 and EWS-5.

Non-Engineering Graduate Apprentice - 60 Posts

Discipline Posts
Science 20
Commerce 25
Arts 15

The Non-Engineering Graduate Apprentice category has 60 positions with reservation distribution of UR-27, OBC-16, SC-8, ST-4 and EWS-5.

Technician Apprentice (Diploma) - 35 Posts

Discipline Posts
Mechanical / Aerospace 10
Electronics (ECE/EIE/ICE/ETE) 5
Electrical & Electronics (EEE) 5
Computer Science (CSE/IT) 3
Civil 4
Chemical 4
Automobile 3
Photography 1

The Technician Apprentice category contains 35 positions.

Diploma (DCCP) - 60 Posts

Discipline Posts
Commercial & Computer Practice 60

Trade Apprentice - 180 Posts

Trade Posts
Fitter 75
Electrician 25
Electronic Mechanic 30
Chemical 15
Refrigeration & Air Conditioning 10
Plumber / POCM 5
Diesel Mechanic 5
Machinist 3
Turner 2
Welder 2
Draughtsman (Mechanical) 3
Draughtsman (Civil) 3
Motor Mechanic 2

The Trade Apprentice category has the highest number of positions, with 180 posts. The reservation distribution is UR-75, OBC-48, SC-27, ST-13 and EWS-17.

Vocational Apprentice - 15 Posts

Discipline Posts
Multipurpose Health Worker (MPHW) 7
Medical Lab Technician (MLT) 4
Construction Engineering Technology (CET) 4

The Vocational Apprentice category has 15 positions with reservation distribution of UR-8, OBC-3, SC-2, ST-1 and EWS-1.

SDSC SHAR Apprentice Eligibility Criteria 2026

The educational qualification differs according to the Apprentice category. Candidates must possess the qualification relevant to the discipline, branch or trade for which they are applying.

Engineering Graduate Apprentice

Candidates must have a B.E./B.Tech degree in the relevant discipline from a recognized University/Institute with first-class marks and a minimum of 60% marks or 6.32 CGPA.

Non-Engineering Graduate Apprentice

Candidates must have a B.Sc. in Mathematics, Physics, Chemistry, Electronics or Computer Science, B.Com. or B.A. from a recognized University/Institute with first-class marks and a minimum of 60% marks or 6.32 CGPA.

Technician Apprentice

Candidates must possess a Diploma in the relevant discipline from a recognized University/Institute with first-class marks and a minimum of 60% marks or 6.32 CGPA.

Trade Apprentice

Candidates must have SSLC/SSC + ITI/NTC in the relevant trade from NCVT.

Vocational Apprentice

Candidates must possess a certificate of a vocational course in the relevant discipline involving two years of study after completion of secondary-stage school education, recognized by the All India Council for Technical Education (AICTE).

Important: Applicants possessing sandwich course certificates, short-term/certificate courses, etc., or applicants pursuing higher studies are not eligible. For Graduate and Diploma Apprenticeship, the applicant must have passed the relevant qualification in 2022 or thereafter.

SDSC SHAR Apprentice Stipend 2026

Apprentice Category Monthly Stipend
Engineering Graduate Apprentice ₹12,300
Non-Engineering Graduate Apprentice ₹12,300
Technician Apprentice ₹10,900
Trade Apprentice ₹9,600
Vocational Apprentice ₹9,600

The notification specifies the above stipend rates for the respective Apprentice categories.

SDSC SHAR Apprentice Age Limit 2026

The uploaded notification does not specify a separate age limit or upper-age relaxation in the eligibility section. Therefore, no age limit has been added here rather than assuming an age criterion that is not stated in the notification.

SDSC SHAR Apprentice Selection Process 2026

Selection will be based on academic performance and subsequent document verification. SDSC SHAR will prepare category-wise merit lists based on academic scores for each Apprentice category. Candidates will then be shortlisted according to their position in the merit list against the relevant discipline, branch, trade or subject.

Shortlisted candidates will be called for document verification. Only candidates who attend document verification and satisfy all the prescribed requirements will be considered for apprenticeship engagement. No Travelling Allowance will be paid to candidates shortlisted for document verification.

SDSC SHAR Apprentice Application Fee 2026

The uploaded notification does not mention any application fee. Therefore, candidates should follow the application instructions on the prescribed portals and should not assume a fee unless it is displayed by the official application system.

How to Apply for SDSC SHAR Apprentice Recruitment 2026?

Eligible candidates must first register themselves on the National Apprenticeship Training Scheme (NATS) or National Apprenticeship Promotion Scheme portal, as applicable. After completing the required registration, eligible applicants must submit the SDSC SHAR Apprenticeship application through the UMANG portal.

  1. Visit the NATS portal or National Apprenticeship Promotion Scheme portal.
  2. Complete the required apprenticeship registration.
  3. Upload the Degree/Diploma certificate, as applicable, and valid Government-issued identity documents.
  4. Obtain the Enrolment Number/Apprenticeship Registration Number generated after successful registration.
  5. Ensure that the Aadhaar number is seeded with the bank account and enabled for DBT.
  6. Visit the UMANG portal.
  7. Register and log in to the UMANG portal.
  8. Search for SDSC SHAR Apprenticeship.
  9. Select the relevant Apprentice position.
  10. Enter all required details carefully.
  11. Upload the prescribed supporting documents.
  12. Review the entered information and submit the application.
  13. Retain a copy of the submitted application for future reference.

The notification specifically states that relevant certificates such as 10th/SSC, Intermediate, ITI, Diploma and Graduation certificates should be uploaded in JPG/JPEG/PNG format and should not exceed 1 MB.

Important Documents for SDSC SHAR Apprentice Application

  • 10th/SSC certificate
  • Intermediate certificate, where applicable
  • ITI/NTC certificate, where applicable
  • Diploma certificate, where applicable
  • Engineering or Non-Engineering Graduation certificate, where applicable
  • Valid Government-issued identity document
  • Recent photograph
  • Signature
  • SC/ST/OBC caste certificate, where applicable
  • PwBD certificate, where applicable

The notification requires candidates belonging to reserved categories to produce the relevant certificates during document verification. EWS candidates must produce a valid Income and Asset Certificate for 2026-2027, while PwBD candidates must produce a valid disability certificate and Unique Disability Identity Card.

SDSC SHAR Apprentice Important Dates 2026

Event Date
Notification Date 06 November 2026
Online Registration Starts 06 November 2026
Last Date for Online Registration 26 November 2026

The notification gives 06 November 2026 as the opening date and 26 November 2026 as the closing date for online registration.

SDSC SHAR Apprentice Training Period 2026

The apprenticeship training period will be 12 months, commencing from execution of the apprenticeship contract. Selected candidates are required to execute an apprenticeship contract under the Apprentices Act, 1961 and the Amendment Act, 1973.

Selected candidates must also submit a medical certificate certifying their fitness at the time of joining.

Important Points for SDSC SHAR Apprentice Recruitment 2026

  • Only Indian Nationals are eligible to apply.
  • A total of 400 Apprentice positions are available.
  • Online registration starts on 06 November 2026.
  • The last date for online registration is 26 November 2026.
  • Graduate and Diploma Apprentices must have passed the relevant qualification in 2022 or thereafter.
  • Candidates pursuing higher studies are not eligible.
  • Candidates who have already undergone or are currently undergoing apprenticeship training under the Apprentices Act are not eligible.
  • Candidates having one year or more experience in any organisation are not eligible.
  • The apprenticeship training period is 12 months.
  • Selection is based on academic merit followed by document verification.
  • Candidates shortlisted for document verification will not be eligible for Travelling Allowance.
  • Selected candidates must submit a medical fitness certificate at joining.
  • There is no claim for permanent, temporary or ad-hoc employment after completion of apprenticeship training.
  • Original documents must be produced during document verification.
  • Applicants must make their own arrangements for lodging and boarding during document verification.
  • Accommodation, if required, may be provided on a shared basis in an SDSC SHAR residential colony, subject to availability.

These conditions are specifically stated in the notification and should be checked carefully before submitting the application.

Tags: SDSC SHAR Recruitment 2026, SDSC SHAR Trade Apprentice, Diploma and More Recruitment 2026, SDSC SHAR Jobs 2026

More Related Articles

SDSC SHAR Apprentice Recruitment 2026 - FAQs

1. How many posts are available in SDSC SHAR Apprentice Recruitment 2026?
A total of 400 Apprentice positions are available across different categories.
2. What is the last date to apply for SDSC SHAR Apprentice Recruitment 2026?
The last date for online registration is 26 November 2026.
3. When does the SDSC SHAR Apprentice application process start?
Online registration starts on 06 November 2026.
4. What is the qualification for Engineering Graduate Apprentice?
Candidates must have a relevant B.E./B.Tech degree from a recognized University/Institute with first-class marks and at least 60% marks or 6.32 CGPA.  
5. What is the qualification for Non-Engineering Graduate Apprentice?
Candidates must have a relevant B.Sc., B.Com. or B.A. qualification with first-class marks and at least 60% marks or 6.32 CGPA.  
🏠Home 💼Jobs 📄Result 🎫Admit Card